For exhaust and stop start control and dynamic memory setting of your RSQ3 F3. Control valves with variable selections, keep last Auto Stop Start setting AND Drive Select in the mode you applied and after ignition is switched off, it returns to applied settings on restarting.
With this control unit you have the ability to control your exhaust flaps via the Drive Select and the ESP key.
Drive Select (Individual: Exhaust sound)
Dynamic: Flaps permanently open
Auto: Open from 3000 rpm / 80% accelerator pedal (just before kickdown)
Comfort: Open from 4500 rpm / 80% accelerator pedal (just before kickdown)
Easy Switch (double-click ESP):
With a double-click on the ESP key , the flaps can be opened and closed independently of the Drive Select . The automatic open at 4500 rpm always remains .
Pass through mode / workshop mode:
Press the Auto Stop start key for 10 seconds and hold, and the module is disabled. Everything behaves as if no module was installed. As a feedback for a successful activation or deactivation, the Auto Stop Start LED switches automatically.
If you don’t want this device seen by service or EPA it makes the module invisible
Transmission S detection:
As soon as you set the gearbox to S , both flaps open. (Function only available with original gearbox coding)
The automatic start-stop setting is saved and restored after the vehicle is started.
The Drive select remains in the Dynamic (Individual: Engine / Transmission) even after the engine started .